Best Hydraulic Hammer Manufacturers,Hydraulic Pile Driver Factories

360º No Bridge Mini Sprinklers(Upside Down Type)

These sprinkler are the most advanced with unique mechanism, special construction without a bridge for even distribution and excellent performance even in difficult conditions.

Advantage

• ique with strong propulsion-Smooth operation even in bad conditions.
• m construction without a bridge-Uniform water distribution.
• ti-insect design, Swivel seals the nozzle once the water is shut off.
• tegral nozzle filter, Protects the nozzle from debris in the water.
• ecial engineering raw materials for long life and durability.
• rge drops for added wind resistance. 

Technical Data

• Wide range of nozzles to meet all applications

l  Wetting diameter:5.5-9.0m (18-30 Ft)

l  34L/h, 49L/h, 66L/h and 80L/h @ 2bar

l  Recommended Filtration:

l  Up-right type and upside down position to meet different requirement.

l  100 mesh for flow rates up to 50L/h.

l  80 mesh for flow rates up to 70L/h.

l  rking pressure maximum range: 1.0-3.0 bar (14.5-43.5psi). 80 mesh for flow rates up to 70L/h.

l  timal working pressure range: 1.0-2.0 bar(14.5-32psi).

want to know more types of mini sprinklers,welcome to visite our website:chinadrip.com

The difference between a pipe mold spiral duct machine and a steel belt spiral duct machine lies in the method they use to form spiral ducts and the materials they are designed to work with:

Pipe Mold Spiral Duct Machine: This type of machine forms spiral ducts by utilizing a pipe-shaped mold. The sheet metal is fed into the machine and wrapped around the mold to create the spiral shape. The edges of the metal are then connected to form a continuous sealed duct. The pipe mold spiral duct machine is typically used for fabricating spiral ducts from galvanized steel or stainless steel sheets.

Steel Belt Spiral Duct Machine: In contrast, a steel belt spiral duct machine uses a different method to form spiral ducts. Instead of a pipe-shaped mold, it employs a steel belt that rotates and bends the sheet metal into the desired spiral shape. The edges of the metal are either interlocked or connected through various means to create a sealed duct. Steel belt spiral duct machines are often used for manufacturing spiral ducts from stainless steel or aluminum sheets.

Both types of machines are efficient and suitable for mass production of spiral ducts in the heating, ventilation, and air conditioning (HVAC) industry. The choice between a pipe mold spiral duct machine and a steel belt spiral duct machine may depend on factors such as the specific material requirements, production volume, available space, and desired customization options.

Let’s get to know SINO SUPPLY in Mexico FESPA Exhibition.

6ft/1.8M Eco solvent printer with Epson DX11/XP600 print head, the most competitive printing machine. Similar to DX5, high resolution and high speed. It’s the best machine to start printing business.

10ft/3.2M Wide large format solvent printer with Konica Minolta 512I print heads, It’s the one of the most steady printing machines, and also the printing system is satisfied by clients. It’s not affected by working environment, such as temperature, power supply and humidity.

5 In 1 Digital Mug Heat Press Machine, with digital panel.5 mug in one time, High quality mug heater. Presses a transfer onto an imprint able substrate. Using high temperatures and pressures for a certain amount of time, the transfer is permanently embedded into the mug.

Laser Engraving Cutting Machine 9060 is widely used for advertising making, art crafts, furniture making, textile and fabric cutting, it suits for wood, plastics, acrylic, textile, leather, etc. Can automatically adjust the working table to satisfy the demands of cutting different thickness materials.

CNC Router EKLH-K1-1325 is a whole cast iron body, with industrial design and powerful spindle. It is professional designed for sign making, has leading design and high quality parts ensure high speed, high accuracy and high stability of the machine tool.

From August 26, 2019 to August 28, 2019, the 22nd DPES (Autumn) Guangzhou International Advertising Marking Exhibition was held in Guangzhou Poly Pavilion, China. We are honored to participate in this exhibition and exchange and communication between our peers. In this exhibition, we saw a lot of machine exhibitions. Every booth has a positive and enthusiastic staff. When we see customers staying at their booths, we will introduce products on our own initiative. We will try our best to serve every customer, even the peers who come to watch, will communicate with each other and introduce patiently.

At the exhibition, there are mainly 3.8m 2 heads XP600 eco solvent printer, 1.9m 2 heads XP600 printer, 1.3m 1 head XP600 printer, UV flatbed 6090, Epson 4720 sublimation printer, as well as some spare parts and ink exhibitions. Every booth staff has professional product knowledge, self-confident attitude and patient attitude towards the exhibition. This exhibition is mainly for domestic business, more domestic customers, but also some foreign customers to participate in, by the way to buy their own parts and order machines.

Our main machines on display are 1.9m and 3.2m xp600 printers. They are our main machines at present. They are economical, efficient, suitable for starting the printing business, and also suitable for reducing the production cost. They are gradually replacing some high-priced machines. They are popular printers in the market.

How to order an automatic machine for your product?

Sinuowei team design and manufacture automatic assembly machine with 10 year of experience.

We have sold hundreds of machines already at home and abroad and they are working very well so far.

As time went by, our machine becomes even more sophisticated with higher efficiency and greater stability.

What we produce is a customizable non-standard automation equipment.

It is very different from the standard machine with uniform industry standards and specifications for manufacturing equipment.

The non-standard machine will be designed and adjusted according to the structure of the parts of the product as clients’ requirements.

The client gets a machine which will meet with the demand of the client absolutely.
You can just contact us to design and manufacture a full automation machine for you when you encounter the following situations:

• If the labor cost of your product is too high;
• If the supply of your product falls short of demand;
• If the quality of your product is not easy to control.

Every machine is different.

Therefore, the product details are necessary before getting the right quotation.

How to order an automatic machine for your product？

You need to know the steps as following:

Step 1

You can send us your product picture to us with the semi-finished product and finished product.

And we can show the picture to our designer to know whether your product can be made by this kind of automation assembly machine.

Step 2

When we confirmed that your product is ok for an automatic machine. You can provide us the data as follows:

1. The real product picture with semi-finished and finished.
2. It is necessary to provide us the size in each part,If you can provide us the design draw,that will be great.
3. How do you make your products manually? Can you provide us the video of each step?

Our designers will get an insight to understand your product. The model of our automated machine can be designed in preliminary.

Since the information you have provided as above, we can reply as follows:

1. Price;
2. Efficiency;
3. The brand of the main configuration;
4. Operation scheme.

Step 3

If you think the Initial quotation if ok for you. Welcome to visit our factory to confirm more details of your machine.

And we will make a contract as both views at the meeting. Please send us some sample with semi-finished and finished asap.

If your deposit arrived, we will submit the order to our production department to arrange design and manufacture according to the signed contract.

Step 4

There are two things shall be arranged before delivery.

One is acceptance, the other is technology training

1. When the machine to be finished, we will invite the client to see their machine. Upon the acceptance of the machines by the client, the second deposit shall be paid within 10 days after acceptance in the first time.
2. When the second deposit to be paid, the Client can send their technicians to receive machine technology training about one or two weeks in our factory. We will provide room and board for them.
3. After technology training,we will invite client acceptance in the second time. The machine will be packet in import stand plywood box and delivery to the port when the balance to be received after final acceptance.

Step 5

Client shall make all the preparations about power, air source, installation place in advanced.

When the machine arrived, your trained technicians will arrange installation of the machine easily.

Better material will be used in export machine. Though thousand times of debugging to make sure everything goes well in the future.

We will provide some free vulnerable parts and the design draw for our client.

Up to know, our machine running very well in our clients’ factory. And they can handle all the things by themselves.

Step 6

The warranty period shall be 12 months counting from the date when the buyer balance to be received after sign the of Final Acceptance.

After the quality guarantee period, we still provide toll-free technical support.

We will feedback within 24 hours and solve the problem according to the pictures, descriptions, and videos of the fault location provided by customers.

If there has the problem that customers can't solve by themselves. We will send technicians over there and their salary about $150 per day. All cost will be borne by the client.

Aircleanings Technology Ltd(ACT) is an engineering company delivery tailor-made and optimum air pollutant control solutions. Ultra Low Emission Flue Gas Cleaning Technology named Dry Multi-emission Control (D-MEC),to control the emission level of Sulfur Oxide(SO_X),Particulate, Nitrogen Oxide(NO_X),Acids(HCL,HF),Heavy Metals(Hg, Cd), Dioxin, Furans.
As more and more rigorous emission limitation to Steel and Iron industry, the steel plant owners have to turn their attentions to the emission control. And ACT is a world leading and innovative environment protection enterprise in China, with a large amount of references in power plant and numbers of in steel.

In the year of 2018, regarding the good performance of similar references, many steel plants showed their willing to co-operate with ACT, who has much experience in steel industry. The customers were all impressed by D-MEC system, many kinds of pollutants can be removed  by one system, really economic and comprehensive with good performance.

HZS50 concrete mixing plant introduction:

First, The HZS50 concrete mixing plant adopts a dual computer control system. When the two machines are switched, the automatic guarantee system with no influence can continue to control the production. Dynamic panel display, can clearly understand the operation of each part. Intuitive monitoring interface for clear and accurate observation of on-site workflow. Report printing management is available.

HZS50 concrete batching plant is a fully automatic concrete mixing station equipment consisting of batching device, aggregate conveying device, powder conveying device, water supply additive system, metering system, mixing system, electric control system and gas control system. HZS50 concrete mixing station has the characteristics of reasonable structure, excellent performance, reliable operation, convenient operation and accurate measurement. It is suitable for the production of large-scale concrete such as roads, airports, ports, hydropower and other large-scale projects such as prefabricated components and commercial concrete. In various construction and construction.

Second, the main features of HZS50 concrete mixing plant:

1. It adopts modular structure, which is quick to install and disassemble and convenient to transport. With a variety of arrangements, it can adapt to the requirements of different venues.

2. The mixing machine adopts JS1000 double-shaft forced concrete mixer, which has good mixing quality and high productivity. It can complete good mixing in dry time, semi-dry hardness, plasticity and various proportions of concrete.

3. The metering components and control components of all metering units are imported components and controlled by microcomputer, which fully guarantees accurate measurement and stable performance.

4. All powder materials, from feeding, batching, metering, feeding to stirring and discharging, are carried out in a closed state. The high-quality dust collector is used in the main building, and the packaging of the main building and the belt conveyor is closed, which greatly reduces The dust and noise are environmentally polluting and the environmental performance is good.

5. Each repair and maintenance part has a platform or ladder, and the main machine is cleaned with a high-pressure pump cleaning device, which has good maintenance performance.

6. The whole ready mix concrete plant adopts dual computer control system. When the two machines are switched, the automatic guarantee system with no influence can continue to control the production. Dynamic panel display, can clearly understand the operation of each part. Intuitive monitoring interface for clear and accurate observation of on-site workflow. Report printing management is available.

The control system of HZS120 concrete batching plant is the center of the whole mixing plant. It is controlled by computer and can be controlled automatically or manually. It is easy to operate and easy to master. So what are the main functions and features of the HZS120 concrete batching plant control system?

The whole control system of the concrete mixing plant HZS120 adopts Siemens or Schneider Electric components, IPC + Touch Screen mode: AD acquisition board, I/O board, IPC computer, high-precision data acquisition module, the export type plant uses high-precision Toledo load cell to ensure accurate collection of weight data. With multi-channel HD monitor, high-efficiency dot matrix printer.

Function and characteristics of the control system of concrete mixing plant HZS120:

1.The system can realize single-disk or single-truck batching result analysis and can automatically compensate;

2.The system is equipped with a network management system and monitoring system designed for the concrete mix plant;

3.Can store any formula, and can be easily modified, each material name can be changed;

4.The discharging sequence is randomly adjustable in batches;

5.The mixing time is randomly adjustable, and different formulas can be arranged for different mixing times;

6.Realize the automatic control of the whole process of batching, feeding, mixing and discharging;

7.Automatic printing of single batch, truck and dispatch list, or manual printing as needed;

8.Automatic correction and storage of weighing advances;

9.Really realize the system automatic deduction when the material is over-weighed, and the deducted part is reserved for the next batch, and really realize the system automatic supplement the weighing when the material is under weighing;

10.Online automatic detection and correction of sand moisture content;

11.Various manual intervention functions, and manual/automatic switching without affecting the production process;

12.The operation is simple and convenient, and the interface is simple and simple.

The equipment material of the control system of HZS120 concrete mixing plant of different manufacturers may be different, so the price will be different. XDM has been engaged in the production of this field for many years, with rich experience, skilled and advanced technology. We not only provide reliable concrete mixing plants, but also provide technical support for you all the time. It is a professional manufacturer of concrete mixing plant equipment you can trust!

Concrete mixer of concrete batch plant is an important equipment for the production of concrete. Many people do not pay attention to maintenance when using it. When using it, they found that the efficiency of the concrete mixer is reduced, but they don't know why. The main reasons for the reduced efficiency of concrete mixers are the following:

1.Filter and oil compatibility. The Concrete mixers of concrete batch plant contain both metal filter elements and most non-metallic filter elements. They all have problems with whether they are compatible with the oil in the system. These include compatibility issues between chemical and thermal effects. Especially if it is not affected under high temperature conditions, it is more important. Therefore, various filter elements must be tested for oil compatibility at elevated temperatures.

2.The impact of low temperature work.The system operating at low temperatures also has an adverse effect on the mixer of the concrete mixing plant. Because at low temperatures, some non-metallic materials in the filter element become more fragile; and at low temperatures, an increase in the viscosity of the oil causes an increase in pressure drop, which is highly likely to cause cracks in the dielectric material.

3.The periodic flow of oil. The flow of oil in the system is usually unstable. When the flow rate changes, it will cause bending deformation of the filter element. In the case of periodic flow, fatigue deformation of the material may cause fatigue cracks due to repeated deformation of the filter medium material.

Therefore, when using a concrete mixer, it is necessary to develop good habits and regular maintenance. As a professional concrete batching plant manufacturer, Fujian Xinda Machinery has strong production capacity and fast delivery of products. Once customers sign a cooperation contract with us, they can rest easy, waiting for the purchased products to be shipped, assembled and commissioned, and then directly generate economic value.

The screw conveyor is mainly used for conveying cement and fly ash materials in concrete mixing plants. It has the advantages of small diameter of screw body, high rotating speed, large conveying quantity, high precision and good conveying condition.But after long time use, the problem of material blockage is also very troublesome, how it should be solved at this time?

Increase the discharge port or lengthen the end of the discharge chute to solve the problem of poor or late discharge.At the same time, a small section of counter-rotating blade can be installed at the end of the discharge chute at the discharge port to prevent the end from blocking the material.Strictly follow the operation rules to make no-load starting and no-load parking;Ensure continuous average feeding;Carry out necessary cleaning of materials entering the conveyor to prevent large impurities or fibrous impurities from entering the machine and causing blockage.

Install the level meter and blocking sensor to realize automatic control and alarm; Set up a anti-blocking valve on the cover plate of the discharge end. Minimize the transverse dimensions of the intermediate suspension bearing to reduce the possibility of blocking  when the material passes through the intermediate bearing.

The rotation direction of the rotary axis of the screw conveyor determines the conveying direction of materials. However, the general design of the screw conveyor is based on the single conveying to design the rotating blade.When the reverse transmission, will greatly reduce the service life of the conveyor.

Fujian Xinda Machinery specializes in the production of concrete batching plant . It is a construction machinery manufacturing enterprise integrating R&D, manufacturing and sales. Both its concrete batching plant equipment and concrete mixer equipment are well received by users, it is a trustworthy manufacturer. Customers are welcome to consult , order or visit the factory.